DI-M9101N is a UL-listed intelligent combination smoke/heat detector supporting electronic addressing (1-242), fully compatible with GST series fire alarm control panels
| Operating Voltage | Loop 24VDC |
| Standby Current | ≤0.8mA |
| Alarm Current | ≤1.8mA (without remote indicator) ≤3.8mA (with remote indicator) |
| LED Indicator | Red Normal: Flash on polling Fire: Steadily ON |
| Remote Indicator Output | Polarized output. Directly connect to remote indicator (built in 10k resistor in series, output current is 2mA); Flash in alarming and do not illuminate in normal. |
| Maximum Ripple Voltage | 2V ( peak-to-peak) |
| Programming | Electronically addressing from 1 to 242 |
| Sensitivity and range | Level 1: 1.23%~2.7% per ft Level 2: 2.0%~3.89% per ft |
| Maximum spacing (When Used as a Heat Detector only) | 50 ft. (15.2 m) |
| Action Temperature | 135°F (57.2°C) |
| UL Temperature Range | 32°F (°C) - 100°F (37.8°C) |
| Operating Temperature | 14°F (-10°C) - 122°F (+50°C) |
| Relative Humidity | ≤95%, non condensing |
| Material of Enclosure | ABS White (RAL 9016) |
| Ingress Protection Rating | IP2X |
| Dimensions | Diameter: 100mm Height: 54.5mm (with base) |
| Mounting Hole Distance | 45mm-75mm |
| Weight | 110g |
@ Copyright belongs to Chau Duy Phat